DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Reauthenticate Port(s) for Port Based 802.1x
This window allows you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull
down menus
From
and
To
and clicking
Apply
. The
Reauthenticate Port Table
displays the current status of the
reauthenticated port(s) once you have clicked
Apply.
Click
Security > 802.1X > Reauthenticate Port(s)
to view the following window:
Figure 10- 18. Reauthenticate Port and Reauthenticate Port Table window
This window displays the following information:
Parameter Description
Port
The port number of the reauthenticated port.
MAC Address
Displays the physical address of the Switch where the port resides.
Auth PAE State
The Authenticator State will display one of the following:
Initialize, Disconnected,
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth
or
ForceUnauth.
BackendState
The Backend State will display one of the following:
Request, Response, Success, Fail,
Timeout, Idle
or
Initialize.
Open Dir
The Operational Controlled Directions are
both
and
in
.
PortStatus
The status of the controlled port can be
Authorized
or
Unauthorized
.
NOTE:
The user must first globally enable 802.1X in the
DES-3018 Web Management Tool
window before reauthenticating ports. Information in the
Reauthenticate Ports Table
cannot be
viewed before enabling 802.1X.
NOTE:
The uplink module ports (DES-3010F/G ports 9-10, DES-3018 ports 17-18, DES-3026
ports 25-26) do not support the 802.1X function.
129
