DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
TFTP Services
Trivial File Transfer Protocol
(TFTP) services allow the Switch’s firmware to be upgraded by transferring a new
firmware file from a TFTP server to the Switch or vice versa. Use the pull-down menu to select the service to be
completed.
Download Firmware
is used to transfer a firmware file from an outside source to the Switch using the TFTP
Protocol.
Download Configuration
is used to transfer a configuration file from an outside source to the Switch using the
TFTP Protocol.
Upload Configuration
is used to transfer a configuration file from the Switch to an outside source using
the TFTP Protocol.
Upload Log
is used to transfer the Switch’s log file from the Switch to an outside source using the
TFTP Protocol. Once the user has selected an operation to perform, enter the
Server IP Address
and the path of the
filename in use and click
Start
to initiate the file transfer.
Figure 6- 15. TFTP Services screen
Ping Test
Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then responds to
or "echoes" the packets sent from the Switch. This is very useful to verify connectivity between the Switch and other nodes
on the network.
Figure 6- 16. Ping Test
The user may use Infinite times radio button, in the
Repeat Pinging for:
field, which will tell the ping program to keep
sending ICMP Echo packets to the specified IP address until the program is stopped. The user may opt to choose a specific
number of times to ping the
Target IP Address
by clicking its radio button and entering a number between 1 and 255. The
user can also choose a
Time Out
for the ping, which will terminate the ping request if no response packet has returned to
the Switch in the allotted time. Click
Start
to initiate the Ping program.
45
