background image

 

66

 

the outside of the package.  Do not include any manuals or accessories in the shipping package.  D-Link will only 
replace the defective portion of the Product and will not ship back any accessories. 

• 

The customer is responsible for all in-bound shipping charges to D-Link.  No Cash on Delivery (“COD”) is allowed.  

Products sent COD will either be rejected by D-Link or become the property of D-Link.  Products shall be fully insured by 
the customer and shipped to 

D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708

.  D-Link will not 

be held responsible for any packages that are lost in transit to D-Link.  The repaired or replaced packages will be 
shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. 
Expedited shipping is available if shipping charges are prepaid by the customer and upon request. 

 

D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or 
for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable 
handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing 
requirements, or that is determined by D-Link not to be defective or non-conforming. 

 

What Is Not Covered: 

This limited warranty provided by D-Link does not cover: Products, if in D-Link’s judgment, have been 

subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, 
repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has 
been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and 
shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that 
occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;  Any hardware, software, firmware or 
other products or services provided  by anyone other than D-Link; Products that have been purchased from inventory clearance 
or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation 
pertaining to the product.  Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this Warranty. 

 

Disclaimer of Other Warranties: 

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS 

PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY 
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY 
IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF 
SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE 
LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE 
OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. 

 

Limitation of Liability: 

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY 

CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF 
THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR 
PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR 
COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA 
CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY 
SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF 
ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT 
OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.  THE MAXIMUM LIABILITY OF D-LINK UNDER 
THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE 
FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER 
WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY 

 

Summary of Contents for DES-1526
































































































Reviews: