5 Command Line Interface
DES-1210 Series Switch Web UI Reference Guide
Syntax
reboot
Example
DES-1210-28> reboot
% Device will reboot, please wait a few minutes to re-login.
DES-1210-28>
Figure 5.6 – The reboot command
reset
All configurations will be reset to the default settings.
Syntax
reset
config
Example
DES-1210-28> reset config
% Device will reboot after reset configuration successfully.
DES-1210-28>
Figure 5.7 – The reset config command
show ipif
The command displays the current IP address of the switch.
Syntax
show ipif
Example
DES-1210-28> show ipif
IP Setting Mode : Static
IP Address : 10.90.90.90
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
DES-1210-28>
Figure 5.8 – The show ipif command
show switch
The command displays the status of the switch.
Syntax
show switch
Example
DES-1210-28> show switch
System name :
System Contact :
System Location :
System up time : 0 days, 6 hrs, 32 min, 17 secs
System Time : 07/07/2012 06:32:19
System hardware version : B1
System firmware version : 3.10.003
System boot version : 1.00.008
System Protocol version : 2.001.004
System serial number : 1MB1733K0000A
MAC Address : 00-18-E7-48-85-50
DES-1210-28>
Figure 5.9 – The show switch command
88
