6
U
N PA CKI N G AN D
S
ETU P
Unpacking
Open the shipping carton of the Switch and carefully unpack its contents. The
carton should contain the following items:
One DES-1010G 8-port 10/100Mbps plus 2-port
10/100/1000Mbps Gigabit Ethernet Switch
Four rubber feet with adhesive backing
Screws and two mounting brackets
One AC power cord
This manual
Quick Installation Guide
If any item is missing or damaged, please contact your local reseller for
replacement.
Setup
The setup of the Switch can be performed by using the following steps:
The surface must support at least 11 lbs (5 kg).
The power outlet should be within 6 feet (1.82 meters) of the
device.
Visually inspect the power cord and see that it is secured fully to
the AC power outlet on the Switch.
Make sure that there is proper heat dissipation from and adequate
ventilation around the Switch. Leave at least 10 cm (4 inches) of
space at the front and rear of the switch for ventilation.
Do not place heavy objects on the Switch.