D-Link DCS-960L User Manual Download Page 31

Page: 31 / 70

D-Link DCS-960L User Manual

Section 3 - Configuration

Audio and Video

This section allows you to configure the audio and video settings for your camera.

Encode Type:

Resolution:

Bit Rate/JPEG

Quality:

Frame Rate:

RTSP URL:

Microphone

Enable:

Volume:

Your camera has separate settings for the H.264 and MJPEG video streams.

Select the desired video resolution from 1280x720, 800x600, 720x480, 640x480,

and 320x240. Higher settings offer better quality, but will require more

bandwidth to stream.

Select the bitrate(H.264) or quality(MJPEG) for the video stream. Higher bitrates

and quality will require more bandwidth.

Select the frame rate(FPS) to use for the video stream. Higher settings offer

better quality, but will require more bandwidth to stream.

The URL used to connect to the camera when viewing from QuickTime or a

mobile device.

Check this box to enable the camera’s microphone.

Use this dropdown box to adjust the volume of the camera’s audio.

Click

Save Settings

to save your changes.

Summary of Contents for DCS-960L







































































Search results

Summary of Contents for DCS-960L

Reviews:

Related manuals for DCS-960L

Brands by name

Popular brands

D-Link DCS-960L, User Manual

Search results

Summary of Contents for DCS-960L

Reviews:

Related manuals for DCS-960L

Brands by name

Popular brands