43
D-Link DCS-936L User Manual
Section 3 - Configuration
SD Recording
This option allows you to configure and set a schedule for the recording to an inserted microSD card.
SD Recording:
Trigger by:
Recording
Type:
Pre-event
Recording:
Post-event
Recording:
Check this box to enable the recording feature.
Select whether the event is activated by
Motion, Schedule,
or if the video
is
Always
recording.
• Motion
: Enables recording when motion is detected. You can limit
motion-triggered recording to a specific schedule by selection
Only
during
and entering the times you want motion-triggered recording
to be enabled.
• Schedule
: Enables recording according to a schedule. Enter the times
you want the camera to record. If you are recording snapshots, a
snapshot will be taken every second during these times.
• Always
: This will enable continuous recording. If you are recording
snapshots, a snapshot will be taken every second.
• Sound
: Enables recording when sound is detected. You can limit
sound-triggered recording to a specific schedule by selection
Only
during
and entering the times you want sound-triggered recording
to be enabled.
You can choose to record snapshots or video. Snapshots will use Video
Profile 2. For video recordings, you may choose Video Profile 1 or 3 and
select the file format and recording length. For more on video profile
options, refer to
If
Trigger By
is set to
Motion
or
Sound
, this will set how many seconds
to record before the event occurs. If you are recording snapshots, one
snapshot will be taken each second.
If
Trigger By
is set to
Motion
or
Sound
, this will set how many seconds
to record after the event occurs. If you are recording snapshots, one
snapshot will be taken each second.
