37
D-Link DCS-936L User Manual
Section 3 - Configuration
This is the URL used to connect to the camera when viewing from
QuickTime or a mobile device. For instance, live1.sdp can be accessed
at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the IP address of
your camera.
Select a method of switching between day and night modes. During day
mode, the IR cut filter will be used to ensure that your video will have the
correct colors. During night mode, the IR LEDs will be turned on and the
IR cut filter moves out of the way to give the camera night vision.
• Auto
: This will automatically switch between day and night mode
based on the amount of ambient light. When there is enough light,
day mode will be used. When it gets dark, the camera will switch to
night mode.
You can use the
Light Sensor Sensitivity
drop-down box to
determine how sensitive the camera’s light sensor will be and how
quickly your camera will respond to changes in ambient light.
• Manual
: The camera will only switch between day and night mode
when requested to through the Live Video interface on the mydlink
website or mobile app.
• Always Day Mode
: The camera will always use day mode.
• Always Night Mode
: The camera will always use night mode.
• Day Mode Schedule
: This option lets you use a schedule to switch
between day and night mode. Enter the times you want the camera
to use day mode. The camera will use night mode for all times
outside of this schedule.
Allows you to enable and disable or adjust the volume levels of the
microphone.
Click
Save Settings
to save your changes.
RTSP URL:
Day/Night
Mode:
Audio Setup:
