33
D-Link DCS-935L User Manual
Section 3 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure what settings to use,
check with your e-mail service provider.
SMTP Server
Address:
SMTP Server
Port:
Sender e-mail
Address:
Receiver e-mail
Address:
User Name:
Password:
Use SSL-TLS/
STARTTLS
This is the domain name or IP address of your external e-mail server.
This is the port used by your external e-mail server.
This is the e-mail address listed as the sender for your notification e-mails.
This is the e-mail address that your notification e-mails will be sent to.
If the SMTP server uses authentication, enter your user name.
If the SMTP server uses authentication, enter your password.
If your SMTP server requires SSL-TLS or STARTTLS, select it here.
For example, if you want to use Gmail with SSL-TLS for e-mail notifications, you
can follow the setup procedure as below:
Step 1
- Enter “smtp.gmail.com” in SMTP Server Address.
Step 2
- Change the SMTP server port number from 25 to 465.
Step 3
- Enter your gmail e-mail address in Sender E-mail Address.
Step 4
- Enter the destination e-mail address in Receiver E-mail Address.
Step 5
- Enter the user name required to access the SMTP server.
Step 6
- Enter the password required to access the SMTP server.
Step 7
- Select SSL-TLS and then click Save Settings.
Step 8
- Click the Test button to send a test e-mail will be sent.
Note:
You can also use
STARTTLS
, which will use SMTP server port number
587
.
If you want to use a Yahoo SMTP server, the SMTP server address will be different
between each registered region, and only SMTP port
465
is supported for
SSL-
TLS
.
