![background image](http://html.mh-extra.com/html/d-link/dcs-931l-cloud-camera-1050/dcs-931l-cloud-camera-1050_user-manual_77751033.webp)
33
D-Link DCS-931L User Manual
33
Section 3 - Configuration
SMTP Server
Address:
Sender e-mail
Address:
Receiver e-mail
Address:
User Name:
Password:
This is the domain name or IP address of your external e-mail server.
This is the e-mail address listed as the sender for your notification e-mails.
This is the e-mail address that your notification e-mails will be sent to.
If the SMTP server uses authentication, enter your user name.
If the SMTP server uses authentication, enter your password.
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure what settings to use,
check with your e-mail service provider.
For example, if you want to use Gmail with SSL-TLS for e-mail notifications, you
can follow the setup procedure as below:
Step 1
- Enter “smtp.gmail.com” in SMTP Server Address.
Step 2
- Change the SMTP server port number from 25 to
465
.
Step 3
- Enter your gmail e-mail address in Sender E-mail Address.
Step 4
- Enter the destination e-mail address in Receiver E-mail Address.
Step 5
- Enter the user name required to access the SMTP server.
Step 6
- Enter the password required to access the SMTP server.
Step 7
- Select
SSL-TLS
and then click
Save Settings
.
Step 8
- Click the
Test
button to send a test e-mail will be sent to the e-mail
account listed above.
Note
: You can also use
STARTTLS
, which will use SMTP server port number
587
.
Note
: If you want to use a Yahoo SMTP server, the SMTP server address will be
different between each registered region, and only SMTP port
465
is supported
for
SSL-TLS
.