22
Q7: How do I access my DCS-8000LH camera remotely?
In order to view your mydlink cam remotely through the mydlink portal or using the mydlink app, you must
register your camera to a mydlink account. This is done while running the Camera Installer which came
supplied with your camera.
Please go to
Q8: What can I do if my DCS-8000LH is not working correctly?
•
Reset the camera and run the setup steps again.
To reset the camera, use a paper clip and then press and hold the reset button for 10 seconds and release.
•
To make sure your hardware is installed correctly, make sure that:
-
Your Internet connection is working.
-
Your router’s LAN & WAN connections are working.
-
Your router supports UPnP.
-
Your camera is on the same network as your mobile device.
-
Both your mobile device and camera have a working Internet connection.
•
If your camera is still not working, check your router and make sure it has the latest firmware.
Summary of Contents for DCS-8000LH
Page 1: ...DCS 8000LH HW Version FW Version App Name App Version A1 V1 00 05 Mydlink Lite V3 8 0...
Page 4: ...3 Step 3 Tap Add a New Camera...
Page 9: ...8 Step 3 Tap Motion Detection Step 4 Tap the button next to Enable Motion Detection to turn on...
Page 12: ...11 Step 9 Tap the button next to the camera name to enable or disable push notification...
