57
D-Link DCS-6915 User Manual
Section 3: Advanced Configuration
Sequence Line
The Network Camera supports eight Sequence Lines; each Sequence Line consists of up to
64 Preset Points.
Note
: Before setting this function, users must pre-define at least two Preset Points.
Sequence Setting
Click on the
Edit
button in
Sequence Setting
section to enter the Sequence setting menu.
Sequence Line
: Select the number of the Sequence Line to be set from the drop-down list in
the top of the Sequence setting menu.
Sequential Preset Points Setting
:
1. Specify a path number to use.
2. Specify up to 64 point numbers using the Prev Page and Next Page buttons to navigate
between the sequence preset numbers:
a. Select a preset point from the Preset List.
b. Specify the Dwell Time.
c. Specify the Camera Speed.
3. Repeat steps a,b, and c, for up to 64 points.
Sequence Run
Select the specified Sequence Line from the drop-down list, click on the
Go
button, and then
the camera will start moving forward each scene sequentially as programmed. To view the
camera executing a Sequence Line in full screen mode, please move the cursor onto the live
view pane, right-click select
fullscreen
. To stop running the Sequence Line, simply move the
cursor to the live view pane and move the camera in any direction.
