37
D-Link DCS-6045L User Manual
37
Section 3 - Configuration
FTP
This section allows you to configure your camera to send snapshots and video clips to an FTP server.
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enable the
uploading of
images to an
FTP server:
Image
Frequency:
Base File Name:
Enter the IP address of the FTP server that you will be connecting to.
Enter the port of the FTP server that you will be connecting to.
Enter the user name of your FTP server account.
Enter the password of your FTP server account.
Enter the destination path/folder to save files to on the FTP server.
Enabling passive mode may help you reach your FTP server if your camera
is behind a router protected by a firewall.
Enabling this will allow snapshots to be uploaded in different ways:
• Choosing
Always
will upload snapshots continuously based on
the
Image Frequency
specified.
• Choosing
Schedule
will allow you to schedule when to start and
stop the uploading of snapshots.
• Select
Motion/Sound Detection
if you would like the camera to
upload images only when motion or sound is detected.
Set how frequently you want images to be taken and uploaded. You can
choose to upload by frames per second, or by seconds per frame.
Set what you want the base file name to be for your snapshots.
