D-Link DCS-5610 User Manual
Section - Configuration
Stream Options:
Media Options:
Protocol Options:
UDP Protocol:
UDP Unicast:
UDP Multicast
TCP:
HTTP Protocol:
Record Options:
You can select which video stream profile to use.
Allows the user to determine whether to receive only
video, audio, or both video & audio.
There are 4 protocols for you to choose for the video
streaming.
This is recommended because it is an ideal protocol
for transmitting real-time audio and video data, which
can tolerate some lost packets.
Will stream to a single computer.
Will stream to multiple computers using multicast.
Provides higher quality video streaming than UDP
does. It provides error correction and guarantees
packet to be delivered to client. However, transmission
speed will be reduced.
Offers the highest image and video quality. However,
packet losses will diminish image quality when
bandwidth becomes restricted. If the network is
protected by a firewall and it opens HTTP port (80)
only, HTTP protocol must be selected. In this mode,
audio is disabled and only video can be viewed. UDP connections will not be available to remote users if all four ports have not
been forwarded (as shown on page 32). Only the HTTP port must be forwarded for remote users to make an HTTP connection
(video only).
Allows the user to specify a destination folder and prefix filename for the recorded video.
Client Setup
You may configure and select the setting for your media streaming and recording
Summary of Contents for DCS-5610
Page 1: ......
Page 56: ...56 D Link DCS 5610 User Manual Section 3 Configuration Help ...
