10
D-Link DCS-5610 User Manual
Section 1 - Product Overview
Hardware Installation
Connect the Ethernet Cable
Connect an Ethernet cable to the network cable connector located on the Internet Camera’s
back panel and attach it to the network.
Attach the External Power Supply
Attach the external power supply to the DC power input connector located on the Internet
Camera’s back panel (labeled DC 12V) and connect it to an AC power outlet.
Note:
When you have a proper connection, the LED will turn green. The light may cycle
on and off and your computer may show an intermittent loss of connectivity, this is normal
until you have configured your Internet Camera.
Connect Using Power-Over-Ethernet
Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-5610 will turn green
to indicate a proper connection.
Summary of Contents for DCS-5610
Page 1: ......
Page 56: ...56 D Link DCS 5610 User Manual Section 3 Configuration Help ...
