D-Link DCS-5030L User Manual Download Page 58

Page: 58 / 84

D-Link DCS-5030L User Manual

Section 3 - Configuration

System

This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.

Save To Local

Hard Drive:

Load From

Local Hard

Drive:

Restore

To Factory

Default:

Reboot The

Device:

Click the

Save Configuration

button to save the current camera

configuration to your local PC.

To load a previously saved configuration, click the

Browse...

button, select your saved configuration file, then click the

Restore Configuration From File

button.

Click the

Restore Factory Defaults

button to reset all settings

back to the factory defaults. Please note that this will erase any

changes you have made to the settings of the camera.

Click the

Reboot the Device

button to reboot the camera.

Summary of Contents for DCS-5030L





















































































Search results

Summary of Contents for DCS-5030L

Reviews:

Related manuals for DCS-5030L

Brands by name

Popular brands

D-Link DCS-5030L, User Manual

Search results

Summary of Contents for DCS-5030L

Reviews:

Related manuals for DCS-5030L

Brands by name

Popular brands