43
D-Link DCS-5030L User Manual
43
Section 3 - Configuration
SMTP Server
Address:
SMTP Server
Port:
Sender e-mail
Address:
Receiver
Address:
User Name:
Password:
This is the domain name or IP address of your external e-mail
server.
This allows you to set the port for the SMTP Server. The default
value is 25, and should only be changed if advised by your
e-mail provider.
This is the e-mail address listed as the sender for your notification
e-mails.
This is the e-mail address that your notification e-mails will be
sent to.
If the SMTP server uses authentication, enter your user name.
If the SMTP server uses authentication, enter your password.
For example, if you want to use Gmail with SSL-TLS for e-mail
notifications, you can follow the setup procedure as below:
Step 1
- Enter “smtp.gmail.com” in SMTP Server Address.
Step 2
- Change the SMTP server port number from 25 to
465.
Step 3
- Enter your gmail e-mail address in Sender E-mail
Address.
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure
what settings to use, check with your e-mail service provider.
