38
D-Link DCS-5222L User Manual
Section 4 - Configuration
Audio and Video
You may configure four video profiles with different settings for your
camera. You may also set up different profiles for your computer and
mobile display. In addition, you may configure the audio (speakers
and microphone) settings for your camera. There are three sensor
output selections (VGA, XGA, and SXGA). Do not select SXGA if you
want to turn on the motion detection feature.
Video Profile:
Encode Type:
Resolution:
FPS:
bps:
Quality:
RTSP URL:
This section allows you to change the
Encode
Type
,
Resolution
,
FPS
, and
Quality
.
The compression format used when viewing your
camera.
Select the desired video resolution from the drop-
down menu. The higher setting, the better the
image quality will be. However, it will use more
resource within your network.
Select the optimal setting depending on your
network status. Please note that a higher setting
can obtain better image quality. However, it will
use more resources within your network.
Select the bit rate to assign the video. The bps
setting is used as a maximum limit for the amount
of data the camera will use. A higher setting will
result in better looking video, but will also have a
larger file size.
Select one of five levels of image quality: Highest,
High, Medium, Low, and Lowest.
The URL used to connect to the camera when
viewing from QuickTime or a mobile device.