![background image](http://html1.mh-extra.com/html/d-link/dcs-4714e/dcs-4714e_user-manual_3259645053.webp)
53
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual
Section 3: Configuration
SNMP
Enable
SNMPv1/v2c
Read/Write
Community
Read-Only
Community
Trap Address
Trap Port
Trap
Community
Enable this option to allow for SNMPv1 and SNMPv2c management of the
camera.
Enter a name for the R/W community of your SNMP server.
Enter a name for the read-only community of your SNMP server.
Enter the IP address where SNMP traps should be sent.
Enter port of the IP address to which the trap messages will be sent.
Enter the SNMP trap community name.
Here you can set the Simple Network Management Protocol (SNMP) settings for the camera. After making any changes, click the
Save
button.