28
D-Link DCS-4701E User Manual
Section 3: Configuration
Enable QoS:
Enable IPv6:
Enable Multicast for stream:
Enable Bonjour:
Bonjour Name:
Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service during
busy periods. If the Network Camera is connected to a
router that itself implements QoS, the router's settings
will override the QoS settings of the camera.
Enabling this setting will enable use of the IPv6 protocol.
Click the IPv6 Information button to see the camera's
current IPv6 details, or you can check
Manually setup
the IP address
to manually set up the IP address, specify
a default router, and set the primary DNS.
The DCS-4701E allows you to multicast each of the
available streams via group address and specify the TTL
value for each stream. Enter the port and TTL settings
you wish to use if you do not want to use the defaults.
Enable this to allow other network devices to connect to
this camera using Bonjour.
Enter the name to identify this camera on Bonjour.
