26
D-Link DCS-4622 User Manual
Section 3: Configuration
Enable
UPnP Port
Forwarding:
Enable PPPoE:
User Name /
Password:
HTTP Port:
Access Name
for Stream 1/2:
HTTPS Port:
Authentication:
RTSP Port:
Access Name
for Stream 1/2:
Enable CoS:
Enable QoS:
Enabling this setting allows the camera to add port forwarding entries to
the router automatically on a UPnP capable network. If you enable this
setting, enter the Forwarding Port to use.
Enable this setting if your network uses PPPoE.
Enter the username and password for your PPPoE account. Re-enter your
password in the Confirm Password field. You may obtain this information
from your ISP.
The default port number is 80.
The default name is video#.mjpg, where # is the number of the stream.
You may use a PC with a secure browser to connect to the HTTPS port of
the camera. The default port number is 443.
Choose to enable or disable RTSP digest encryption. Digest encryption
uses MD5 hashes.
The port number that you use for RTSP streaming to mobile devices, such
as mobile phones or PDAs. The default port number is 554.
You may specify the address of a particular stream. For instance, live1.sdp
can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents
the IP address of your camera.
Enabling the Class of Service setting implements a best-effort policy to
prioritize traffic without making any bandwidth reservations.
Enabling QoS allows you to specify a traffic priority policy to ensure a
consistent Quality of Service during busy periods. If the Network Camera is
connected to a router that itself implements QoS, the router's settings will
override the QoS settings of the camera.
