![background image](http://html.mh-extra.com/html/d-link/dcs-4603/dcs-4603_user-manual_77622034.webp)
34
D-Link DCS-4603 User Manual
Section 3: Configuration
Motion Detection
Motion detection enables the camera to monitor the video feed for movement. Here, you can adjust the sensitivity settings that determine whether
motion is detected by the camera or not. After making any changes, click the
Save Settings
button to save your changes.
Enable Video
Motion:
Sensitivity:
Draw Motion
Area:
Erase Motion
Area:
Select this box to enable the motion detection feature of your camera.
Specifies how sensitive motion detection will be from 0% to 100%. A low
sensitivity setting means that there must be large changes between two
images in order to detect motion, and a high sensitivity setting means that
even small changes will cause motion to be detected.
Use your mouse to click and drag on the areas that you would like to
monitor for motion.
To erase a motion detection area, simply click on the red square that you
wish to remove.
Right click on the camera image to bring up the following menu options:
Select All:
Draws a motion detection area over the entire screen.
Clear All:
Clears any motion detection areas that have been drawn.
Restore:
Restores the previously specified motion detection areas.