![background image](http://html.mh-extra.com/html/d-link/dcs-4603/dcs-4603_user-manual_77622047.webp)
47
D-Link DCS-4603 User Manual
Section 3: Configuration
System
In this section, you may backup, restore and reset the camera configuration, or reboot the camera.
Save To Local
Hard Drive:
Load From
Local Hard
Drive:
Restore
to Factory
Defaults:
Reboot Device:
Enable
Schedule
Reboot:
You may save your current camera configuration as a file on your computer.
Locate a pre-saved configuration by clicking
Browse
and then restore the
pre-defined settings to your camera by clicking
Load Configuration
.
You may reset your camera and restore the factory settings by clicking
Restore Factory Defaults
.
This will restart your camera.
If you want your camera to reboot on a regular schedule, check the
Enable
Schedule Reboot
checkbox, then select the days and time you want the
camera to reboot on.