![background image](http://html1.mh-extra.com/html/d-link/dcs-3430/dcs-3430_user-manual_3204543035.webp)
35
D-Link DCS-3411/3430 User Manual
Section 3 - Configuration
Wireless Setup (DCS-3430 only)
This sections allows you to setup and configure the wireless settings for your camera.
Enable Wireless:
Site Survey:
SSID:
Wireless Mode:
Channel:
Authentication:
Encryption:
Key:
Signal:
Select to enable wireless configuration.
Select the wireless connection you would like to use
from the pull-down menu.
Enter the name of you wireless network.
Use the dropdown box to select the mode of
the wireless network you wish to connect to.
Infrastructure
is normally used to connect to an
access point or router.
Ad-Hoc
is usually used to
connect directly to another computer.
If you are using Ad Hoc mode, select the channel
of the wireless network you wish to connect to,
or select
Auto
.
Select the authentication you use on your wireless
network -
Open
,
Shared (WEP)
,
WPA-PSK
, or
WPA-PSK2
.
If you use
WPA-PSK
or
WPA-PSK2
authentication, you will need to specify whether your wireless network uses TKIP or AES encryption.
If you use
Open
or
Shared
authentication, this setting will be automatically set for you.
If you use
WEP, WPA-PSK
, or
WPA-PSK2
authentication, enter the
Key
(also known as password) used for your wireless network.
Indicates the strength of the wirelss signal between the camera and the access point.