Step 4: Click on
Browse
and select the downloaded firmware file. Once the firmware file
appears in the
File Path
field, click
Upload
to commence the firmware upgrade process.
10.How do I mount my camera to the wall or ceiling?
Note: It is suggested that you configure the camera before mounTng.
Step 1: Using the mounTng plate as a guide, mark where you want to posiTon the camera.
Depending on the material of the wall or ceiling, use proper tools to drill two holes where
the holes are located on the mounTng plate. If the wall is made out of concrete, drill the
holes first, then insert the plasTc anchors to support the screws.
Step 2: Place the mounTng plate over the holes that are in the wall. Make sure to align the
Summary of Contents for DCS-2330L
