![background image](http://html1.mh-extra.com/html/d-link/dcs-2121-securicam-network-camera/dcs-2121-securicam-network-camera_user-manual_3120597043.webp)
40
SETUP > Snapshot
Here, you can set the camera to take snapshots when motion is detected and/or when a signal is
sent to the DI input. Snapshots can be sent to an e-mail address and/or to an FTP server.
Enable Snapshot:
Check this box to enable the snapshot feature.
Trigger Event:
Motion detection:
This will set the camera to take a snapshot whenever motion is detected.
D/I:
This will set the camera to take a snapshot whenever a signal is sent to the D/I input. You
can find more information about the DI/DO interface at the end of this document.
Send to:
E-mail Address:
When checked, the camera will send the snapshots it takes to the e-mail
address specified in the following text boxes. If you do not know what to enter for the User Name,
Password, or SMTP Mail Server, contact your e-mail service provider for details.
User Name:
Enter the username or login name for your e-mail account.
Password:
Enter the password for your e-mail account.
SMTP Mail Server:
Enter the SMTP server for your e-mail account.
Sender E-mail Address:
Enter the e-mail address you want to appear as the “From:”
e-mail address in the snapshot e-mail.
Recipient E-mail Address:
Enter the e-mail address you want to send your snapshots to.
Port:
Enter the port used by your SMTP server.
Test:
Clicking this button will take a snapshot and will try to upload it to your FTP server
using the settings you have entered.
Summary of Contents for DCS-2121 - SECURICAM Network Camera
Page 1: ......
Page 9: ...6 1 External speaker jack 2 Power jack 3 Ethernet port 4 DI DO port Bottom 1 2 3 4...
Page 20: ...17...