42
SETUP > Digital Output
This screen allows you to enable the Digital Out (D/O) port, and allows you to select what events
will trigger the Digital Out signal.
Enable D/O:
Check this box to enable the D/O port.
Motion Detection:
When checked, the D/O port will send a signal whenever motion is
detected by the camera. (When motion detection has been enabled)
D/I:
When checked, the D/O port will send a signal whenever a signal is detected on the
Digital In (D/I) port.
Note:
If the camera is set to SXGA mode
in Audio and Video
, Motion Detection is disabled.
Summary of Contents for DCS-2121 - SECURICAM Network Camera
Page 1: ......
Page 9: ...6 1 External speaker jack 2 Power jack 3 Ethernet port 4 DI DO port Bottom 1 2 3 4...
Page 20: ...17...