![background image](http://html.mh-extra.com/html/d-link/dcs-1201/dcs-1201_user-manual_77578027.webp)
27
D-Link DCS-1201 User Manual
Section 3: Configuration
Primary DNS:
Secondary DNS:
Enable UPnP Presentation:
Enable UPnP Port Forwarding:
Enable PPPoE:
User Name / Password:
HTTP Port:
Access Name for Stream 1~3:
HTTPS Port:
Authentication:
Enter the primary domain name server that translates
names to IP addresses.
Enter the secondary domain name server used to back
up the Primary DNS.
Enabling this setting allows your camera to be configured
as a UPnP device on your network.
Enabling this setting allows the camera to add port
forwarding entries into the router automatically on a
UPnP capable network.
Enable this setting if your network uses PPPoE.
Enter the username and password for your PPPoE
account. Re-enter your password in the Confirm
Password field. You may obtain this information from
your ISP.
Enter the port to use for HTTP access to the camera. The
default port number is 80.
Enter a name to use for HTTP streaming access. The
default name is video#.mjpg, where # is the number of
the stream.
Enter the port to use for HTTPS access to the camera.
You may use a PC with a secure browser to connect to
the HTTPS port of the camera. The default port number
is 443.
Choose to enable or disable RTSP digest authentication.
Digest authentication uses MD5 hashes.