30
D-Link DCS-1201 User Manual
Section 3: Configuration
Image Setup
In this section, you can configure the video image settings for your camera.
Enable Privacy Mask:
Mirror:
Flip:
Anti Flicker:
White Balance:
The Privacy Mask setting allows you to specify up to 3
rectangular areas on the camera's image to be blocked/
excluded from recordings and snapshots.
You may click and drag the mouse cursor over the
camera image to draw a mask area. Right clicking on the
camera image brings up the following menu options:
Disable All:
Disables all mask areas
Enable All:
Enables all mask areas
Reset All:
Clears all mask areas.
This will mirror the image horizontally.
This will flip the image vertically. If the camera is installed
upside down, Flip and Mirror should both be checked.
Select the frequency used by your power lines to avoid
interference or distortion.
Use the drop-down box to change white balance settings
to help balance colors for different environments. You
can choose from Auto, Outdoor, Indoor, Fluorescent,
and Push Hold.
