20
D-Link DCH-M225 User Manual
Section 2 - Product Setup
WPS Button
3. The DCH-M225 uses the push-button method for WPS. Press and
hold the
WPS
button on your wireless router or access point
until the light starts blinking green. Allow up to two minutes
for the WPS process to finish. When a connection is successfully
established, the LED on the device should turn solid green.
Note:
Refer to your router or access point’s user manual instructions
for more information about the WPS process.
4. If your wireless device does not support WPS, click
Select this
option if you want to set up your network manually
.
Click
Next
to continue.
5. Wait while your DCH-M225 scans for available Wi-Fi networks. You
will see a list of networks found. Select the
Wi-Fi Network
you
wish to use, click
Select
.
Note:
If the network you would like to connect to isn’t listed, click
Back
and select the manual option again to perform another scan.
Make sure you are in range of your wireless router.
Summary of Contents for DCH-M225
Page 1: ......
