D-Link DCH-M225 User Manual Download Page 11

Page: 11 / 69

D-Link DCH-M225 User Manual

Section 1 - Product Overview

Hardware Overview

Side and Bottom/WPS and Reset

WPS Button

Press the WPS (Wi-Fi Protected Setup) button for a minimum of one second to automatically connect with Wi-Fi clients. The LED on the

front of the device turns solid green, when the DCH-M225 has successfully connected.

Audio Line Out

Connect an external speaker to the audio line out jack*.

Reset Button

Press and hold the reset button for six seconds to reset the DCS-M225 to the factory default settings.

Input: 100-240VAC, 50-60Hz, 0.3A

FCC ID:KA2CHM225A1

IC: 4216A-CHM225A1

Model: DCH-M225A1

CAN ICES-3 (B)/NMB-3(B)

P/N: BCHM225LNA...A1

S/N:RZEP1YMXXXXXX

H/W Ver.: A1 F/W Ver.:1.00

DCH-M225

+Wi-Fi Name(SSID):dlink-XXXX
Wi-Fi Password:XXXXXXXXXX

For Apple Airplay:

a. Open

iTunes

(or the Airplay music app* on your iOS device)

b. Click the

Airplay

icon.

c. Select the

DCH-M225

from the destination list.

d. Click

Play

and the music will stream to the extender.

*You may use an Airplay®, iTunes, or any DLNA-enabled device that is connected to your extended network to play music to the speakers you connect to the DCH-M225.

For DLNA:

a. Download and install a

DLNA

music app.

b. Verify that DLNA is enabled on your device. Refer to

“Audio Renderer” on page 26

c. Within the app, select the

DCH-M225

from the

Play to

or the destination list.

d. Click

Play

and the music will stream to the extender.

Summary of Contents for DCH-M225






































































Search results

Summary of Contents for DCH-M225

Reviews:

Related manuals for DCH-M225

Brands by name

Popular brands

D-Link DCH-M225, User Manual

Search results

Summary of Contents for DCH-M225

Reviews:

Related manuals for DCH-M225

Brands by name

Popular brands