9
D-Link DBA-1210P User Manual
Section 2 - Installation
Dynamic and Static IP Addressing on the AP
When you power on the access point, the built-in DHCP client searches for a DHCP server on the network in order to obtain
an IP Address and other network information. If the AP is not able to be assigned a DHCP IP on the network, you can manually
reconfigure the static IP address and relevant network setting through device Administration Web UI or CLI interface.
To manually configure network setting through device Administration Web UI, please refer to “Web-based Configuration Utility”
on page 13
You can manually configure network setting through device CLI as well by any of the following methods:
• Serial Port Connection to the AP
• Telnet Connection to the AP
• SSH Connection to the AP
Please refer to “Device CLI Configuration” on page 17 for more information on how to configure the DBA-1210P using the CLI.
Caution!
If you do not have a DHCP server on your internal network, and do not plan to use one, the first thing you must do
after powering on the access point is to change the connection type from DHCP to static IP and assign a new static IP address
to the AP.
Caution!
The default login information is
admin/admin
for both the Web UI and CLI. Please note that the credentials might
have been changed through the D-Link Business Cloud.
