15
D-Link DBA-1210P User Manual
Section 3 - Configuration
Access Point Local Settings
If you select DHCP, the UAP acquires its IP address,
subnet mask, DNS, and gateway information
from a DHCP server.
If you select Static IP, you must enter information
in the Static IP Address, Subnet Mask, and Default
Gateway fields.
Select the mode for the DNS.
In Dynamic mode, the IP addresses for the DNS
servers are assigned automatically via DHCP. This
option is only available if you specified DHCP
for the Connection Type. In Manual mode, you
must assign static IP addresses to resolve domain
names.
The management VLAN is the VLAN associated
with the IP address you use to access the AP. The
default management VLAN ID is 1.
Provide a number between 1 and 4094 for the
management VLAN ID.
To enable VLAN, select the
Enable VLAN
check
box.
To disable VLAN , clear the
Enable VLAN
check
box.
Connection
Type:
DNS
Nameservers:
Management
VLAN ID:
Enable VLAN:
From the Local Settings page, you can manually configure the
network settings to fulfill various network environments.
