DAS-3626 VDSL2 Switch User Manual
System Log Configuration
This section contains information for configuring various attributes and properties for System Log Configurations,
including System Log Settings and System Log Host.
System Log Settings
This window allows the user to enable or disable the System Log and specify the System Log Save Mode Settings.
To view this window, click
System Configuration > System Log Settings
as shown below:
Figure 27. System Log Settings menu
The following parameters can be set:
Parameter Description
System Log
To activate the System Log select
Enabled
or
Disabled
.
Save Mode
Use this drop-down menu to specify the method that will trigger a log entry. You can choose
between
On Demand
,
Time Interval
and
Log Trigger
.
On Demand
– This method will only save log files when they manually tell the switch to do so,
using the
Save
Log
link in the
Save
folder.
Time Interval
– This method configures a time interval by which the switch will save the log
files. The user may set a time between
1
and
65535
minutes.
Log Trigger
– This method will save log files to the switch every time a log event occurs on the
switch.
Minutes (1-65535)
Enter a time interval, in minutes, for which you would like a log entry to be made.
To add a new entry, enter the appropriate information and click
Apply
.
System Log Server
The switch can send Syslog messages to up to four designated servers using the
System Log Server
.
To view this window, click
System Configuration > System Log Configuration > System Log Server
as shown
below:
Figure 28. System Log Server menu
24