D-Link DAS-3626 User Manual Download Page 106

Page: 106 / 177

DAS-3626 VDSL2 Switch User Manual

To create a VLAN Batch entry click the

VLAN Batch Settings

tab at the top of the screen which will display the

following window.

Figure 129. 802.1Q VLAN menu – VLAN Batch Settings menu

The following fields can be set in the

VLAN Batch Settings

windows:

Parameter Description

VID List (e.g 2-5)

Enter a VLAN ID List that can be added, deleted or configured.

Advertisement

Enabling this function will allow the switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.

Port List (e.g. 1-5)

Allows an individual port list to be added or deleted as a member of the VLAN.

Tagged

Specifies the port as 802.1Q tagged. Checking the box will designate the port as Tagged.

Untagged

Specifies the port as 802.1Q untagged. Checking the box will designate the port as untagged.

Forbidden

Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.

Click

Apply

to implement changes made.

106

Summary of Contents for DAS-3626

















































































































































































Search results

Summary of Contents for DAS-3626

Reviews:

D-Link DAS-3626, User Manual, Page: 106 / 177

Search results

Summary of Contents for DAS-3626

Reviews: