D-Link DAP-3860, User Manual

Page: 39 / 61

Chapter 4 Advanced Settings 39
Wireless Security Settings
To prevent unauthorized radios from accessing data transmitting over the connectivity, DAP-3860 provides
you with rock solid security settings.
Security Profile Configuration
Open “ Security ” in “ Wireless ” as below:
Figure 30 Security
Network Authentication
Open : It allows any device to join the network without performing any security check.
Encryption
If data encryption is enabled, the key is required and only sharing the same key with other wireless
devices can the communication be established.
None : Available only when the authentication type is open system.
64 bits WEP : It is made up of 10 hexadecimal numbers.
128 bits WEP : It is made up of 26 hexadecimal numbers.
152 bits WEP : It is made up of 32 hexadecimal numbers.
TKIP : Temporal Key Integrity Protocol, which is a kind of dynamic encryption, is co-used with
WPA-PSK, etc.
AES : Advanced Encryption Standard, it is usually co-used with WPA2-PSK, WPA, WPA2, etc.