22
D-Link DAP-3712 User Manual
Section 3 - Configuration
There are four wireless modes:
Access Point
,
Client
,
Access Point (WDS)
, and
Client (WDS)
. To use a
point-to-point or point-to-multipoint connection,
you need to configure the primary DAP-3712 in
Access Point
or
Access Point (WDS)
mode and the
other DAP-3712s in
Client
mode or
Client (WDS)
mode.
If you want to preserves MAC address of clients
frame , it is suggest to use Acess Point(WDS) and
Client (WDS) for each size.
You can set the SSID which the device will
broadcast when
Access Point
or
Access Point
(WDS
) is selected. Alternately, set the SSID of the
remote site when
Client
or
Client (WDS)
is selected.
The default SSID is
dlink
.
Use this to select the channel bandwidth of the
DAP-3712. The default is 80 Mhz.
Use this to select the Wi-Fi channel the AP will
broadcast on. The available channels depend on
the county you selected.
Use this to set the DAP-3712’s output power.
You can select which Wi-Fi encryption the DAP-
3712 should use: Open, WPA-PSK, WPA2-PSK, WPA/
WPA2 Hybrid-PSK, or IEEE802.1X.
To input the WiFI encryption key. The default key
is 1234567890abc
Wireless Mode:
SSID:
Channel Width:
Frequency
(Channel):
Transmit
Power:
Encryption:
Key:
4. Wireless