15
D-Link DAP-3712 User Manual
Section 2 - Installation
Mounting the Device
If you plan to install the DAP-3712 on a pole, orient the front of the device (the dish and antenna) toward the intended coverage
area.
The antenna only transmits data in the direction it is pointed. Be sure to install the device at a height that ensures that the
alignment between the devices is visible and there are no obstructions in the middle.
Note:
The DAP-3712 is designed to receive PoE power from an 802.3at-compliant source. Connecting the DAP-3712 to a PoE device that is not
approved by D-Link can damage the equipment.
Mounting on a Pole
1. Hold the DAP-3712 against the pole in the desired
position.
2. Thread the metal mounting tie through the hole on the
base of the DAP-3712 and wrap it around the pole. Fasten
the tie to secure the device against the pole.
