D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... User Manual Download Page 90

Page: 90 / 104

D-Link DAP-2553 User Manual

Section 3 - Configuration

Firmware and SSL Certification Upload

The current firmware version is displayed

above the file location field. After downloading

the most recent version of firmware for the

DAP-2553 from http://support.dlink.com to your

local computer, use the

Browse

button to locate

the firmware file on your computer. Click

Upload

to update the firmware version. Please don’t turn

the power off while upgrading.

Click

Browse

to locate the SSL Certification file on

your local computer. After selecting and opening

the file, click

Upload

to upload the file to the

DAP-2553.

Upload

Firmware From

Local Hard

Drive:

Upload SSL

Certification

From Local Hard

Drive:

This page allows the user to perform a firmware upgrade. A Firmware upgrade is a function that upgrade the running software

used by the access point. This is a useful feature that prevents future bugs and allows for new features to be added to this

product. Please go to your local D-Link website to see if there is a newer version firmware available.

Summary of Contents for DAP-2553 - Wireless N Dual Band Gigabit Access...









































































































Search results

Summary of Contents for DAP-2553 - Wireless N Dual Band Gigabit Access...

Reviews:

Related manuals for DAP-2553 - Wireless N Dual Band Gigabit Access...

Brands by name

Popular brands

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access..., User Manual

Search results

Summary of Contents for DAP-2553 - Wireless N Dual Band Gigabit Access...

Reviews:

Related manuals for DAP-2553 - Wireless N Dual Band Gigabit Access...

Brands by name

Popular brands