D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... User Manual Download Page 30

Page: 30 / 104

D-Link DAP-2553 User Manual

Section 3 - Configuration

Advanced Settings

Performance

*Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput may vary. Network conditions and environmental factors, including

volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate.

Wireless Band:

Wireless:

Wireless Mode:

Data Rate*:

Indicate 2.4GHz or 5GHz.

Use the drop-down menu to turn the wireless

function

Off

The different combination of clients that can be

supported include

Mixed 802.11n, 802.11g

and 802.11b

Mixed 802.11g and 802.11b

and

802.11n Only

in the 2.4 GHz band and

Mixed

802.11n and 802.11a

802.11a only

, and

802.11n Only

in the 5 GHz band. Please note

that when backwards compatibility is enabled

for legacy (802.11a/g/b) clients, degradation of

802.11n wireless performance is expected.

Indicate the base transfer rate of wireless adapters

on the wireless LAN. The AP will adjust the base

transfer rate depending on the base rate of

the connected device. If there are obstacles or

interference, the AP will step down the rate. This

option is enabled in

Mixed 802.11g and 802.11b

mode (for 2.4 GHz) and

802.11a Only

mode (for

5 GHz). The choices available are

Best (Up to 54)

for 5 GHz and

Best (Up

to 54)

6, 11

5.5

for 2.4 GHz.

Summary of Contents for DAP-2553 - Wireless N Dual Band Gigabit Access...









































































































Search results

Summary of Contents for DAP-2553 - Wireless N Dual Band Gigabit Access...

Reviews:

Related manuals for DAP-2553 - Wireless N Dual Band Gigabit Access...

Brands by name

Popular brands

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access..., User Manual

Search results

Summary of Contents for DAP-2553 - Wireless N Dual Band Gigabit Access...

Reviews:

Related manuals for DAP-2553 - Wireless N Dual Band Gigabit Access...

Brands by name

Popular brands