47
D-Link DAP-2553 User Manual
Section 3 - Configuration
AP Array
The AP Array window is used to create up to 32 APs on a local network to be organized into a single group in order to increase
ease of management. Click the
Save
button to let your changes take effect. Central WiFiManager and AP Array are mutually
exclusive functions.
Enable AP Array:
AP Array Name:
AP Array
Password:
Scan AP Array
List:
Connection
Status:
AP Array List:
Current
Members:
Select the check box to enable the AP array function.
The three modes that are available are
Master
,
Backup Master
, and
Slave
. APs in the same array
will use the same configuration. The configuration
will sync the Master AP to the Slave AP and the
Backup Master AP when a Slave AP and a Backup
Master AP join the AP array.
Enter an AP array name for the group here.
Enter an AP array password for the group here. This
password must be the same on all the APs in the
group.
Click this button to initiate a scan of all the available
APs currently on the network.
Display the AP array connection status.
This table displays the current AP array status for the
following parameters: Array Name, Master IP, MAC,
Master, Backup Master, Slave, and Total.
This table displays all the current array members.
The DAP-2553 AP array feature supports up to eight AP array members.
AP Array Scan
Summary of Contents for DAP-2553 - Wireless N Dual Band Gigabit Access...
Page 1: ......
