34
D-Link DAP-1720 User Manual
Section 3 - Configuration
Enable or disable this network by toggling this slider.
This is the name of the DAP-1720’s 2.4 GHz extended network. If using
Wi-Fi
,
the DAP-1720 will rebroadcast the uplink router’s network under this SSID.
You may also manually set the SSID of the extended network.
Enter the password or network key that you wish to use for the extended
network.
Status:
Wi-Fi Name
(SSID):
Password:
2.4 GHz Extended Wi-Fi
Note
: If you have selected Ethernet as the existing network, you can configure the following
additional settings. For pre-existing Wi-Fi networks, these settings are automatically
configured for optimal performance with you existing network.
Select
Auto
or manually specify a channel for use with this network.
Select
Auto 20/40
or
20 MHz
for the bandwidth you wish this network to use.
Enable or disable HT20/40 coexistence by toggling the slider.
Wi-Fi
Channel:
Channel
Width:
HT20/40
Coexistence:
