54
D-Link DAP-1560 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the access point (192.168.0.50). Click
on
Setup
and then click
Wireless Settings
on the left side.
2. Next to
Security Mode in the Wireless Security Mode section
,
select
WPA-Enterprise.
3. Next to
WPA Mode in the WPA section
, select
Auto (WPA or WPA2),
WPA2 Only, or WPA
Only. Use Auto if you have wireless clients
using both WPA and WPA2.
4. Next to Cipher Type, select
TKIP, AES, or TKIP
and
AES
.
5. Next to
Group Key Update Interval
, enter the amount of time before the group key used for broadcast and multicast data is
changed.
6. Next to
RADIUS Server IP Address
in the EAP (802.1X) section, enter the IP Address of your RADIUS server.
7. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port.
8. Next to
RADIUS Server Shared Secret
, enter the security key.
9. Click
Save Settings
at the top of the window to save your settings.
Configure WPA-Enterprise (AP Mode)
