27
D-Link DAP-1560 User Manual
Section 3 - Configuration
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Use this option to save the current access point
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save
button. You will then see a file dialog, where
you can select a location and file name for the
settings.
Use this option to load previously saved access
point configuration settings. First, click the
Browse
button to find a previously save file of configuration
settings. Then, click the
Load
button to transfer
those settings to the access point.
This option will restore all configuration settings
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the
Save
button above.
Note:
Restoring the factory default settings will not
reset the Wi-Fi Protected Status to Not Configured.
Click to reboot the access point.
System
