DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
When the
Open
or
Shared
value is selected, the
WEP Encryption settings
section is displayed
(the section is unavailable for the wireless network operating modes which support the standard
802.11n):
Figure 82. The
Open
value is selected from the
Network Authentication
drop-down list.
Parameter
Description
Enable Encryption WEP
The checkbox activating WEP encryption. When the checkbox is
selected, the
Default Key ID
field, the
Encryption Key WEP as
HEX
checkbox, the
WEP key length
drop-down list, and four
Encryption Key WEP
fields are displayed on the page. For the
Shared
authentication type the checkbox is always selected.
Default Key ID
The number of the key (from first to fourth) which will be used for
WEP encryption.
Encryption Key WEP
as HEX
Select the checkbox to set a hexadecimal number as a key for
encryption.
WEP key length
The length of WEP encryption key.
Select the value
64bit
to specify keys containing 5 ASCII symbols
or 10 HEX symbols.
Select the value
128bit
to specify keys containing 13 ASCII
symbols or 26 HEX symbols.
Encryption Key WEP (1-
4)
Keys for WEP encryption. The access point uses the key selected
from the
Default Key ID
drop-down list. It is required to specify all
the fields.
Page
98
of 158
