DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
Routing
On the
Advanced / Routing
page, you can add static routes (routes for networks that are not
connected directly to the device but are available through the interfaces of the device) into the
system.
Figure 97. The
Advanced / Routing
page.
To create a new route, click the
Add
button. In the line displayed, you can specify the following
parameters:
Parameter
Description
Destination network
A destination network to which this route is assigned.
Destination netmask
The destination network mask.
Gateway
An IP address through which the destination network can be accessed.
The field is available when the
<Auto>
value is selected from the
Via
Interface
drop-down list of this line.
Metric
A metric for the route. The lower the value, the higher is the route
priority.
Optional
.
After specifying the needed parameters, click the
Apply
button.
To edit an existing route, select a needed field in the relevant line of the table, change its value, and
click the
Apply
button.
To remove an existing route, select the checkbox located to the left of the relevant line in the table
and click the
Delete
button. Then click the
Apply
button.
Page
123
of 158
