64
D-Link COVR-C1210 User Manual
Section 3 - Configuration
System
This page will allow you to backup, restore configuration settings, or restore
settings from a previous backup, reset, and set up a reboot schedule for the
device. On the System Admin page click
System
.
System
Save Settings To
Local Hard Drive:
Click
Save
to download a backup of your current configuration settings
to your local hard drive. This backup can later be used to restore your
settings.
Load Settings
From Local Hard
Drive:
Click
Select File
to browse your local hard drive for a configuration file
to restore your configuration settings from. Once selected, click
Restore
to apply the settings from the configuration backup.
Restore To Factory
Default Settings:
Click
Restore
to restore all configuration settings back to the settings
that were in effect at the time the device was shipped from the factory.
Any settings that have not been saved will be lost, including any rules
that you have created.
Auto Reboot Configuration
Reboot the
Device:
Click the
Reboot
to reboot the device immediately.
Auto Reboot:
Use the drop-down menu to select a schedule for the device to
automatically reboot. The schedule may be set to
Never
,
Daily
, or
Weekly
. Depending on your selection, set a time and date for the
auto reboot schedule.
Click
Save
when you are done.
