D-Link AMPLIFI DAP-1525 User Manual Download Page 34

Page: 34 / 98

D-Link DAP-1525 User Manual

Section 3 - Configuration

Browse:

Upload:

After you have downloaded the new firmware, click

Browse to locate the firmware update on your hard

drive. Click

Upload

to complete the firmware upgrade.

Once you have a firmware update on your computer,

use this option to browse for the file and then upload

the information into the access point.

Firmware

You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of

the computer. Click on

Browse

to locate the firmware file to be used for the update. Please check the D-Link support website

for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from this site.

After you have downloaded the new language pack,

click

Browse

to locate the language pack file on your

hard drive. Click

Upload

to complete the language

pack upgrade.

Language Pack Upgrade

You can change the language of the web UI by uploading

available language packs.

Browse:

Summary of Contents for AMPLIFI DAP-1525



































































































Search results

Summary of Contents for AMPLIFI DAP-1525

Reviews:

Related manuals for AMPLIFI DAP-1525

Brands by name

Popular brands

D-Link AMPLIFI DAP-1525, User Manual

Search results

Summary of Contents for AMPLIFI DAP-1525

Reviews:

Related manuals for AMPLIFI DAP-1525

Brands by name

Popular brands