33
D-Link DAP-1525 User Manual
Section 3 - Configuration
Save Settings
to Local
Hard Drive:
Load Settings
from Local
Hard Drive:
Restore
to Factory
Default
Settings:
Reboot the
Device:
Clear
Language
Pack:
Use this option to save the current access point
configuration settings to a file on the hard disk of the
computer you are using. First, click the
Save
button.
You will then see a file dialog, where you can select a
location and file name for the settings.
Use this option to load previously saved access point
configuration settings. First, use the Browse control
to find a previously save file of configuration settings.
Then, click the
Load
button to transfer those settings
to the access point.
This option will restore all configuration settings back
to the settings that were in effect at the time the access
point was shipped from the factory. Any settings that
have not been saved will be lost, including any rules
that you have created. If you want to save the current
access point configuration settings, use the
Save
button above.
Note:
Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Configured.
Click to reboot the access point.
Click to clear the language pack. This will put the web
UI back to English.
System
