5
TM
If your network
does not
automatically assign IP addresses
( No DHCP
service ), follow these steps to properly configure your Access Point:
Deploying Your Access Point
without
Dynamic IP Addressing
Option 2:
Step 1:
Connect the Access Point directly to your computer using an
Ethernet cable.
Step 2:
Configure the Ethernet connection of your computer as follows:
DAP-3525
PC or Mac
Configure APs
Right- click on the Local Area
Connection which represents your
network adapter and select
Properties
.
Highlight
Internet Protocol (TCP/IP)
and click
Properties
.
Click
Use the following IP address
and enter an IP address that is on
the same subnet as your network
or the LAN IP address on your new
DAP-3525.
Click
OK
twice to save your settings.
Windows
®
7
- Click on
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
>
Change Adapter Setting
.
Windows Vista
®
- Click on
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
>
Manage Network Connections
.
Windows
®
XP
- Click on
Start
>
Control Panel
>
Network Connections
.
Windows
®
2000
- Right-click
My Network Places
>
Properties
.
